Introduction to Partition Walls:
Partition Walls also called Stud Walls are unloaded walls intended to separate apart within a building, to form an interior room/cabinet, or to separate the laundry area from the rest of the building. Since partitioning walls can be loaded with a roof, therefore, they are built solely for the purpose of partitioning. They are not as strong as all the other loaded walls. The partition wall has 12 types. Each type is distinguished from the other on the basis of the materials used in it. Therefore, the definition of each type is a description of the materials used in partition walls.
Different Types of Partitioning Walls:
1. Partitioning of brick walls:
The purpose of a brick wall is similar to that of other types of walls, such as separating one part of a building from another, separating a room, making one interior cabinet, separating one part of that part from another. A brick dividing wall was built with the task of building bricks. A brick wall takes a lot of time to build. Not suitable for the earthquake zone. The advantage of a brick partition wall is that it is not expensive.
2. Partitioning walls made of certified bricks:
Reinforced bricks are made of reinforced material to add strength to bricks. This type of wall is very strong and durable. The disadvantage of this type of movable partition wall is that these walls are heavy and use a lot of load on the floor.
3. Differing a Wall made with Hollow & Clay Brick:
Empty concrete is made of units of concrete and clay bricks are made only of clay. Since these types of bricks are empty on the inner side, so they are lightweight and do not put a lot of load on the floor. This is cheaper to build, but not as strong as reinforced partition walls.
4. Partition wall by concrete material:
Concrete separating concrete is made of concrete made of stone, sand, and cement. Sometimes iron/steel rods are inserted into the concrete material to strengthen it further. Like a brick wall, and a reinforced brick wall, this too is very strong, but still places a heavy load on the lower floor.
5. Glass made Partitions Wall:
The glass partition is made of glass. Thick glass panels, hollow glass blocks, or PVC panels are used to create this type of wall. Most glass used for activity partition walls may be made of opaque glass or other adhesive adhesives are attached to the glass wall to protect privacy.
6. Grass Boards as Building Blocks of Partitions Walls:
These types of walls are easily moved from one place to another. Grass boards are less expensive and weigh less. These are not built permanently but are placed in one place and in time these walls are moved to another location.
7. Partition walls made of Paris cement and burnt minerals:
This type of wall is made of Paris plaster plates or burnt minerals. This is very easy to build, but it does not last very long. These types of walls are well built and their finish is very smooth. These types of walls are easily built and easily demolished.