Many mining OEMs are taking advantage of the opportunities created by this trend. For instance, offers a range of BEV, zero-emission mining machine, including the Scooptram? ST7, the Electric Boomer M2C and smaller truck models.
Are you in need of a stone polish machine? There are several machines on the market, making it challenging to select one that is ideal for your needs. However, with the help of a buying guide for marble polishing machine, it will be easier to find an ideal stone polishing machine.
Indeed, there are numerous brands of stone processing machine in the market. They vary in terms of size, features, and work capacity. Even though selecting an ideal stone polisher may be challenging, with the correct information, it becomes very easy.
Where i can buy Stone polishing machine?
As a machine manufacturer, we have the best stone polishing machines from different brands.
Energy consumption of block-cutting machines represents a major cost item in the processing of travertines and other natural stones. Therefore, determining the optimum sawing conditions for a particular stone is of major importance in the natural stone-processing industry. An experimental study was carried out utilizing a fully instrumented block-cutter to investigate the sawing performances of five different types of travertine blocks during cutting with a circular diamond saw. The sawing tests were performed in the down-cutting mode. Performance measurements were determined by measuring the cutting speed and energy consumption. Then, specific energy was determined. The one main cutting parameter, cutting speed, was varied in the investigation of optimum cutting performance. Furthermore, some physico-mechanical properties of the travertine blocks were determined in the laboratory. As a result, it is found that the energy consumption (specific energy) of block cutting machine is highly affected by cutting speed. It is determined that specific energy value usually decreases when cutting speed increases. When the cutting speed is higher than the determined value, the diamond saw can become stuck in the travertine block; this situation can be a problem for the block-cutting machine. As a result, the optimum cutting speed obtained for the travertine mines examined is approximately 1.5–2.0 m/min.